Germany | English | ÖÐÎÄ
RM300 UV Radiometer
INTRODUCTION£º

The RM300 touch screen UV Radiometer adopts a high-definition full touch screen design, making operation simpler; Even in weak light, it can be quickly read with higher accuracy; The measurement mode can be switched, and the uniformity can be evaluated by testing different areas of the surface light source; The range can be automatically recognized and switched, truly achieving one machine testing from weak light to strong light, making instrument operation simpler and faster. Quickly and accurately measure UV radiometers in various industries such as UV curing, lithography, phototherapy, sterilization, physical therapy fluorescence analysis, plant cultivation, water treatment, meteorology, and agricultural production under different light source intensities.
The UV Radiometer is divided into two parts: the host and the probe. The same host can be paired with multiple probes according to different usage needs, plug and play, to meet more usage scenarios. It can be widely used in laboratories, factories, or other on-site operations, and can achieve accurate UV light intensity and energy testing in almost all application areas of quality control.

KUHNAST RM-300 UV Radiometer
 

Main features:

The instrument adopts a 4.3 inch high-definition capacitive screen with a touch screen design, making operation simpler and display more intuitive;
Adopting high-precision light receiver, testing weak and strong light in one machine;
Ultra large range, with a range change of up to 1 billion;
The maximum, minimum, average, and uniformity of sustainable statistical irradiance or energy data for each group;
Intelligent selection of range, the instrument can switch the range independently based on the strength of the light source;
One machine can be used for multiple purposes, and the same host can use different light receivers according to different light sources;
Equipped with high-precision temperature sensors, it can measure the actual temperature in real-time during instrument dynamic testing;
Compliant with regulations: the verification regulations of "JJG879-2015 Ultraviolet Radiation Illuminometer" and the national standard of "GBT34048-2017 Ultraviolet Radiation Meter";
The instrument has a built-in timer that can accurately record the measurement time;
The instrument can save 30 sets of test data, and can read and store data through PC software, export and generate reports;
Chinese/English language selection;
The main parameters:

Model: RM300
Power range: 0.1uw/cm 2- 100000 MW/cm 2 (Automatically switch units based on the intensity of the light source)
Energy range: 0.1uj/cm 2 - 999999999.9 mj/cm 2
Power unit: uw/cm 2¡¢ MW/cm 2¡¢ W/cm 2¡¢ W/m 2 (Can be automatically/manually switched)
Energy unit: uj/cm 2¡¢ Mj/cm 2¡¢ J/cm 2¡¢ J/m 2 (Can be automatically/manually switched)
Range change: 1 billion
Power error: ¡À 5+5% H (H represents the measured value)
Energy error: ¡À 5%
Resolution: 0.1
Temperature measurement range: -55 ¡æ -125 ¡æ
Temperature error: ¡À 0.5 ¡æ
Response speed: 2048 times/second
Screen refresh rate: 10 times/second
Operation mode: touch screen
Display window: 4.3-inch capacitive touch screen
Battery: 3000mAh lithium battery, with a sustainable range of about 10 hours
Automatic shutdown: 3-minute no induction or no operation automatic shutdown (not effective in charging state)
Operation prompt tone: yes/can be turned off
Operating environment: -20 ¡æ -60 ¡æ, humidity less than 85%, no condensation
Language: Simplified Chinese, English
Size: Host (length 127mm x width 84mm x height 31mm)
Mode selection: regular mode, uniformity mode
Communication method: USB
Calibration cycle: To ensure measurement accuracy and effectiveness more accurately, it is recommended to have a calibration cycle of one year
Optional accessories: computer monitoring software

  Probe parameters£º
 

Probe size: ¦Õ 38mm thick 14mm
Sensitivity hole diameter: ¦Õ 8mm
Operating temperature: -20-120 ¡æ
Probe material: aluminum alloy
Standard line: 1 meter in length, customized extension required
Standard configuration: UVA or UVC or UVV
Probe options: UVA/UVB/UVC/UVV/UVLED